Specific Tools

S.25201

Analog Wrench 3/4''

3/4 WrenchTorque 67-400NmLength (mm) 865

S.159978

Crimper Kit, Superseal, DT, 7 pcs.

Contains :Die for Fully Insulated Quick Disconnector (A2)Die for Italian Superseal Connector (H2)Die for Italian Superseal Connector (H3)Die for Deutsch DT Connector ( Stampe & Formed ) (K3)Die for Deutsch DT Connector ( Stampe & Formed ) (K4)Patented Quick Change Crimper

S.164676

Crimping Tool

Suitable for: Double Grip and Single Grip Terminals, use with cable 0.5mm to 6mm²

S.152535

Deutsch DT Connector, All-in-One Kit, 181 pcs.

All-in-One kit, everything you need to get the job doneOriginal Deutsch DT connector: 2/3/4/6/8/12 cavitiesPatented quick-change crimper®Three AWG Deutsch contact removal tool includedCombination wedge, removal tool and flat tip screwdriver includedEasy refill packs are available separately. Keeping the kit refreshed for the next repairSuitable for agricultural, earth moving equipment and automotive applications

S.152538

Deutsch, Superseal Connector, All-in-One Combo Kit

Save time and money, ordered the Deutsch DT and Superseal connector, All-in-One kit in one combo bundle.Includes a tailor made magnify measurement gauge.Total of 520pcs covers everything you need for the repair.Original Deutsch DT connector: 2/3/4/6/8/12 cavities.Superseal connector: 1/2/3/4/5/6 pole.Patented quick-change crimper®.Easy refill packs are available separately, keeping the kit refreshed for the next repair.Suitable for agricultural, earth moving equipment and automotive applications.

S.153978

NTN SNR IFT SET 33 Bearing Mounting Kit

APPLICATIONSThe use of a suitable socket, associated with the mounting sleeve, enables to install the bearing to the desired adjustment.The simultaneous support of the outer and inner rings prevents the risk of deterioration of the races and rotating assemblies.The kit can also be used for assembling other components such as sealing rings, pinions and pulleys.ADVANTAGESOf light and strong construction for workshop use, this toolbox contains:33 impact rings:Very robust for a long working life.In impact-resistant, synthetic material, avoiding any metal-to-metal contact.Ideal for use in conjunction with a press.Calibrated for approximately 400 different bearings: with bore diameters between 10 and 50 mm and with outside diameters between 26 and 110 mm Clearly and permanently identified to aid selection.3 mounting sleeves:Light and extremely robust, made of aluminium.With a good grip for the hand.1 special dead blow mallet, ensuring optimum impact force is applied.

S.154011

NTN SNR Bore Puller (10-100 mm)

APPLICATIONS This puller kit is specially adapted to carry out, without dismantling your machine, extractions of bearings that are difficult to access, such as: - Bearings housed in blind bearings, - Bearings installed on shafts, - Bearings with a tight fit on outer or inner rings.ADVANTAGES Practical and easyThe kit contains 3 O-rings to facilitate the assembly of your tool.The marking of parts along with the selection table included enables a quick selection of accessories to be used.The visual user guide favours the correct implementation of the tool.Reliable and safeThe design of tools enables successful and safe dismounting, without risk of jacking over and without forces.Each component is made of high quality steel, robust and resistant to impact, ensuring product longevity.FlexibleThe case includes 3 different sizes of shafts and 28 puller arms providing a very wide range of applications.The kit enables extraction of bearings of 10 to 100 mm bore diameter.

S.156562

NTN SNR Fast Therm Smart Temp (Small)

NTN/SNR Portable induction heater Smart Temp (Small)The NTN-SNR bearing induction heaters are intended for heating rolling bearings. Other metal components forming a closed circuit such as bushings, shrink rings, pulleys and gears can also be heated. This will facilitate mounting where an interference fit is required.ADVANTAGESSmall, light heater: weighs only 21 kg.Easy to use, ideal for working on site.Designed for all bearings and rotating parts with a bore diameter above 10 mm with a maximum diameter of 400 mm and a maximum weight of 50 kg.

S.153983

NTN SNR Hook C Spanner 120-180mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153984

NTN SNR Hook C Spanner 15-35mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153985

NTN SNR Hook C Spanner 35-50mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153986

NTN SNR Hook C Spanner 50-80mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153987

NTN SNR Hook C Spanner 80-120mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153994

NTN SNR Infrared Thermometer Lasertemp 301

APPLICATIONSThe LASER TEMP 301 thermometer combines safety with accuracy.The safety of remote infrared measurement for burning, moving or difficult-to-access objects.Accurate measurement using the contact probe.Its elaborate optical system allows small, remote targets to be measured easily and precisely.ADVANTAGESWide measurement range in infrared mode: -50°C to +850°C.High degree of precision, using the:Laser targeting device,The excellent 30:1 distance to target ratio,Emissivity adjustable between 0.1 and 1,Type K thermocouple wire probe.Extremely quick measurements: response time less than 1 second.Internal memory able to record up to 20 measurements.Equipped with the following functions:High / low, visual and audible adjustable alarms,Automatic switch-off to maximise its useful life,Maximum, minimum, difference, average measurement.Light, ergonomic gun shape.Simple to use, it may be easily conﬁgured to work in °C or °F.Back-lit display for easy reading.Supplied with:Type K thermocouple wire probe (range -50°C to +440°C, length 1 m),Protective pouch - User manual.

S.153979

NTN SNR Pin C Spanner 120-180mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153980

NTN SNR Pin C Spanner 35-50mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153981

NTN SNR Pin C Spanner 50-80mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.153982

NTN SNR Pin C Spanner 80-120mm Ø

APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.

S.154002

NTN SNR Self Centre Hydraulic Puller 12T

The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.

S.154003

NTN SNR Self Centre Hydraulic Puller 20T

The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.

S.154004

NTN SNR Self Centre Hydraulic Puller 30T

The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.

S.154001

NTN SNR Self Centre Hydraulic Puller 4T

The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.

S.153998

NTN SNR Self Centre Mechanical Puller 2T

APPLICATIONS Is also well suited to removing pulleys, toothed wheels, flywheels fixed to a shaft.ADVANTAGES PracticalThe self-centering mechanism ensures the simultaneous positioning of the puller’s arms on the bearing.Compact and ergonomic, it may be easily operated in every position by one person. SafeSelf-locking system prevents the arms from bending or slipping.The greater the extraction force, the tighter the jaws grip the part.Robust, designed in hardened steel for maximum strength. Multiple usesQuickly convertible to two or three claws, depending on the space available.

S.153999

NTN SNR Self Centre Mechanical Puller 3T

APPLICATIONS Is also well suited to removing pulleys, toothed wheels, flywheels fixed to a shaft.ADVANTAGES PracticalThe self-centering mechanism ensures the simultaneous positioning of the puller’s arms on the bearing.Compact and ergonomic, it may be easily operated in every position by one person. SafeSelf-locking system prevents the arms from bending or slipping.The greater the extraction force, the tighter the jaws grip the part.Robust, designed in hardened steel for maximum strength. Multiple usesQuickly convertible to two or three claws, depending on the space available.

S.154000

NTN SNR Self Centre Mechanical Puller 5T

APPLICATIONS Is also well suited to removing pulleys, toothed wheels, flywheels fixed to a shaft.ADVANTAGES PracticalThe self-centering mechanism ensures the simultaneous positioning of the puller’s arms on the bearing.Compact and ergonomic, it may be easily operated in every position by one person. SafeSelf-locking system prevents the arms from bending or slipping.The greater the extraction force, the tighter the jaws grip the part.Robust, designed in hardened steel for maximum strength. Multiple usesQuickly convertible to two or three claws, depending on the space available.

S.154009

NTN SNR Tri Section Pulling Plate 12T

APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.

S.154010

NTN SNR Tri Section Pulling Plate 30T

APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.

S.154007

NTN SNR Tri Section Pulling Plate 4T

APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.

S.154008

NTN SNR Tri Section Pulling Plate 8T

APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.

S.12430

Oil Filter Wrench

S.4055

Oil Filter Wrench

10'' Oil Filter Wrench

S.4794

Oil Filter Wrench

Oil FIlter Wrench

S.8928

Piston Ring Compressor - 75mm (3'')

No.892875mm Piston Ring Compressor Ø60-175mm CapacityQuality construction with sprung steel wraps and ratchet action tension mechanism.Supplied with steel key.

S.38903

Professional Antifreeze Tester

Fast & accurate readings at all temperaturesLarge, easy to read scaleHydro-static fluid-lockFor ethylene glycol coolantsTemperature compensated twin-rotor measuring unitInflow duct avoids bubble formation

S.20168

Roller Chain Breaker - No.: 160 - 240

No. 160-240 (To fit chains with a pitch from 11/2'' to 2'')

S.14004

Roller Chain Breaker - No.: 25 - 50 (Agripak 1 pc.)

Pitch: 3/8'' - 5/8''

S.14005

Roller Chain Breaker - No.: 60 - 100 (Agripak 1 pc.)

Pitch: 3/4'' - 1 1/4''

S.151751

Super hard Diamond-Coated Round Micro Files

Female bullet connector cleaner set (12pcs)This 12-piece set of Diamond Micro Round Files are specially designed to remove corrosion from small-type Cannon, Deutsch, Bullet, NATO, Weather Pack and other small round terminal connections.Strong but flexibleSpecifically engineered sizes designed for small round connector typesDiameter sizes range from 0,75mm to 3,02mm and 127mm longFor use in general filing applications such as steel, aluminum, plastic, brass, etc.Comes in a premium-quality holster with magnetic claspIndividual sizes are marked and available for replacementsFile Diameter Sizes: 0,75(2X)-0,98(2X)- 1,29-1,48-1,76-2,03-2,26-2,52-2,78-3,02mmSuper-Hard, Flexible, and Diamond-Coated For Cleaning Small, Round, Female Electrical Pins

S.152536

Superseal Connector, All-in-One Kit, 339 pcs.

All-in-One kit, everything you need to get the job doneSuperseal connector: 1/2/3/4/5/6 polePatented quick-change crimper®German designed crimping dies, one step crimpingEasy refill packs are available separately. Keeping the kit refreshed for the next repairSuitable for agricultural, earth moving equipment and automotive applications

S.152537

Weather Pack Connector, All-in-One Kit, 220 pcs.

All-in-One kit, everything you need to get the job doneWeather pack connector: 1/2/3/4 polePatented quick-change crimper®German designed crimping dies, one step crimpingEasy refill packs are available separately. Keeping the kit refreshed for the next repairSuitable for agricultural, earth moving equipment and automotive applications

Europe

Americas

Australasia

Africa

Other countries

Americas

Australasia

Africa

Other countries

Keyword Search

Category

Advanced Search