Drill Bits

S.171411

Blacksmith Drill Bit 13 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171412

Blacksmith Drill Bit 13.5 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.168854

Blacksmith Drill Bit 14 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171413

Blacksmith Drill Bit 14.5 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171414

Blacksmith Drill Bit 15 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171415

Blacksmith Drill Bit 15.5 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.168855

Blacksmith Drill Bit 16 x 10mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171416

Blacksmith Drill Bit 16.5 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.168856

Blacksmith Drill Bit 17 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171417

Blacksmith Drill Bit 17.5 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171418

Blacksmith Drill Bit 18 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171419

Blacksmith Drill Bit 18.5 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.168857

Blacksmith Drill Bit 19 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171420

Blacksmith Drill Bit 19.5 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171421

Blacksmith Drill Bit 20 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171422

Blacksmith Drill Bit 21 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171423

Blacksmith Drill Bit 22 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171424

Blacksmith Drill Bit 23 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171425

Blacksmith Drill Bit 24 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.171426

Blacksmith Drill Bit 25 x 13mm

Abracs Blacksmith Drill Bits are manufactured with a large diameter and smaller shanks to enable use in standard drill chucks. Suitable for steel, cast iron, non-ferrous materials.

S.168869

Carbide Burr Kit 5 pcs.

Manufactured with High Performance Tungsten Carbide and Double Cut (also known as Cross Cut) design to provide aggressive stock removal and reduced chips for precise deburring. Suitable for use on a variety of Materials such as Steels, Alloys and Cast Iron

S.168852

Cobalt Drill Bit Set 19 pcs.

Abracs HSS Cobalt Drill Bits are precision ground for high performance. The addition of 5% cobalt into the High Speed Steel increases lifetime, strength & wear resistance keeping the drill bit sharper for longer. A key performance feature is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds

S.168851

Cobalt Holesaw Kit 5 pcs. - 20mm, 22mm, 25mm, 29mm & A1 Arbor

Abracs extensive range of expert quality Cobalt Holesaws for use on a wide range of applications. Our Cobalt Holesaws are designed for use by professional trades people and manufactured from premium quality materials. We use Bi-metal construction with 8% Cobalt for extreme strength, durability and performance. Abracs Holesaws are manufactured with high speed variable pitch teeth for fast and clean cutting and are suitable for use on a full range of materials. Each Holesaw comes individually packaged & contains full information on correct speeds, applications, fitting instructions and safety guidelines.

S.168845

Colbalt Holesaw M42 x Ø20

Abracs extensive range of expert quality Cobalt Holesaws for use on a wide range of applications. Our Cobalt Holesaws are designed for use by professional trades people and manufactured from premium quality materials. We use Bi-metal construction with 8% Cobalt for extreme strength, durability and performance. Abracs Holesaws are manufactured with high speed variable pitch teeth for fast and clean cutting and are suitable for use on a full range of materials. Each Holesaw comes individually packaged & contains full information on correct speeds, applications, fitting instructions and safety guidelines.

S.168846

Colbalt Holesaw M42 x Ø22

Abracs extensive range of expert quality Cobalt Holesaws for use on a wide range of applications. Our Cobalt Holesaws are designed for use by professional trades people and manufactured from premium quality materials. We use Bi-metal construction with 8% Cobalt for extreme strength, durability and performance. Abracs Holesaws are manufactured with high speed variable pitch teeth for fast and clean cutting and are suitable for use on a full range of materials. Each Holesaw comes individually packaged & contains full information on correct speeds, applications, fitting instructions and safety guidelines.

S.168847

Colbalt Holesaw M42 x Ø25

Abracs extensive range of expert quality Cobalt Holesaws for use on a wide range of applications. Our Cobalt Holesaws are designed for use by professional trades people and manufactured from premium quality materials. We use Bi-metal construction with 8% Cobalt for extreme strength, durability and performance. Abracs Holesaws are manufactured with high speed variable pitch teeth for fast and clean cutting and are suitable for use on a full range of materials. Each Holesaw comes individually packaged & contains full information on correct speeds, applications, fitting instructions and safety guidelines.

S.168848

Colbalt Holesaw M42 x Ø29

Abracs extensive range of expert quality Cobalt Holesaws for use on a wide range of applications. Our Cobalt Holesaws are designed for use by professional trades people and manufactured from premium quality materials. We use Bi-metal construction with 8% Cobalt for extreme strength, durability and performance. Abracs Holesaws are manufactured with high speed variable pitch teeth for fast and clean cutting and are suitable for use on a full range of materials. Each Holesaw comes individually packaged & contains full information on correct speeds, applications, fitting instructions and safety guidelines.

S.171390

Drill Bit - HSS - Ø1.5mm Titanium Coated 2 pcs.

Length 40mm, Ø1.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171407

Drill Bit - HSS - Ø10.5mm Titanium Coated 1 pc.

Length 137mm, Ø10.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171406

Drill Bit - HSS - Ø10mm Titanium Coated 1 pc.

Length 133mm, Ø10mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171408

Drill Bit - HSS - Ø12mm Titanium Coated 1 pc.

Length 151mm, Ø12mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171409

Drill Bit - HSS - Ø13mm Titanium Coated 1 pc.

Length 151mm, Ø13mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171389

Drill Bit - HSS - Ø1mm Titanium Coated 2 pcs.

Length 34mm, Ø1mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171392

Drill Bit - HSS - Ø2.5mm Titanium Coated 2 pcs.

Length 57mm, Ø2.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171391

Drill Bit - HSS - Ø2mm Titanium Coated 2 pcs.

Length 49mm, Ø2mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171394

Drill Bit - HSS - Ø3.2mm Titanium Coated 2 pcs.

Length 65mm, Ø3.2mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171395

Drill Bit - HSS - Ø3.5mm Titanium Coated 2 pcs.

Length 65mm, Ø3.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171393

Drill Bit - HSS - Ø3mm Titanium Coated 2 pcs.

Length 61mm, Ø3mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171397

Drill Bit - HSS - Ø4.5mm Titanium Coated 2 pcs.

Length 80mm, Ø4.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171396

Drill Bit - HSS - Ø4mm Titanium Coated 2 pcs.

Length 75mm, Ø4mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171399

Drill Bit - HSS - Ø5.5mm Titanium Coated 2 pcs.

Length 93mm, Ø5.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171398

Drill Bit - HSS - Ø5mm Titanium Coated 2 pcs.

Length 86mm, Ø5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171401

Drill Bit - HSS - Ø6.5mm Titanium Coated 1 pc.

Length 101mm, Ø6.5mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171400

Drill Bit - HSS - Ø6mm Titanium Coated 2 pcs.

Length 93mm, Ø6mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

S.171402

Drill Bit - HSS - Ø7mm Titanium Coated 1 pc.

Length 109mm, Ø7mmAbracs HSS Titanium Drill Bits are precision ground for high performance. The reduced friction created by the 5% Titanium Coating means these Drill Bits can last up to 3 x longer than standard HSS Drill Bits and are suitable for drilling a wider range of materials including Metal, Wood, Plastic and other General Construction materials. A key performance feature of Abracs HSS Titanium Pilot Drill Bits is their Split Point cutting head. The Split Point allows the drill bit to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds.DIN 338, right hand, type N, 118º cutting edge with split point, fully ground, titanium coated.Suitable for use on Mild Steel, Sheet Metal, Plastic & Stainless Steel.High precision & long life with TiN coating for heat resistance.

Europe

Americas

Australasia

Africa

Other countries

Americas

Australasia

Africa

Other countries

Drill Bits

Keyword Search

Category

Advanced Search