Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time.LOCTITE® 515 is a medium strength (6 Nmm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.Ideal for machined metal componentsPerfect seal between componentsFor gaps up to 0.25 mm
LOCTITE® 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges.LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.For metal flangesHigh temperature resistant flange gasketAdapts to flange surface irregularities and scratches up to 0.25 mmIncreases the torque capacity of assembled flangesP1 NSF Reg. No.: 123007
LOCTITE® 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminium flanges.LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.Semi-flexible, medium-strength anaerobic flange gasketFor active and inactive rigid metal flangesCures through minor surface contaminationAdapts to flange surface irregularities and gaps up to 0.25 mmGel-type consistencySeals instantly against low pressureReduces inventory costs – no need for large inventory of cut gasketsResists high pressure when fully curedNo compression set or misaligned gasketsEasy to automateReduces process costs – eliminates manual assembly of conventional gasketsNSF P1 Reg. No. 123758
LOCTITE® 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges.LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.For metal flangesHigh temperature resistant flange gasketAdapts to flange surface irregularities and scratches up to 0.25 mmIncreases the torque capacity of assembled flangesP1 NSF Reg. No.: 123007
Gasketing Product - general purpose. Ideal for use on machined and rigid metal flangesLOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE® 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.Excellent water and glycol resistanceIdeal for use on rigid metal parts, e.g. cast iron components and pump housingsHigh oil resistance
